QT-6202SComputerized Single Column Universal Tensile Tester
QT-6202S servo single column universal material testing machine is mainly usedinhardwaretools, fasteners, auto parts, aerospace, wire and cable, rubber plastics, paper packagingandotherindustries of material inspection analysis; in the test process using full digital force, displacement, speedthree closed loop control, using Taiwan AC servo motor and control drive system, with Taiwan high-precision gearbox and Taiwan TBI precision ball screw transmission, in order to achievethebesteffect of transmission efficiency and noise ratio.
This machine is mainly used to test the mechanical properties of metal and non-metal materials. Add fixture accessories to test the physical properties of tensile,compression,peeling,tearing,bending,three-point bending,shear resistance and soon. At the same time according to GB, ISO, JIS, ASTM, DIN and user provided by a variety of standardsfortesting and data processing.
1、 Advanced chip integration technology, professionally designed data acquisition andamplification system, with high integration, stability and reliability, easy to use andotheradvantages. The control software can automatically calculate tensile strength, yieldstrength,fracture strength, elastic modulus, elongation and other test data, and the open formulaeditorcan automatically calculate the force, stress, displacement, deformation and other dataresultsat any specified point in the test process. The control and data processing of the test processmeet the requirements of national standards for metallic and nonmetallic materials.
2、 Control mode: constant speed, positioning shift, constant load, constant load increment rate, constant stress, constant stress increment rate, constant strain, constant strain increment rateand other control mode optional;
3、 Automatic zero setting: after the test starts, the measurement systemautomaticallysetszero;
4、 Automatic save: test data and test conditions are saved automatically to prevent datalosscaused by forgetting to save;
5、 Batch test: For samples with the same parameters, a batch of tests can be completedinsequence after setting once;
6、 Display mode: data and curve are dynamically displayed along with the test process;
7、 Curve traversal: After the test is completed, the curve can be re-analyzed, and the corresponding data of each point on the test curve can be found with the mouse;
8、 Curve selection: stress-strain, force-displacement, force-time, displacement-time curvescanbeselected for display and printing;
9、 Unit switch: Force unit: (g, kg, N, lb), Stress unit: (kg/mm2, N/mm2, Mpa, lbf/in2), Displacement unit: (m, mm, in);
10、Test report: can be programmed and printed according to the format required by users, andcanexport EXCEL file;
11、Safety protection: when the maximum load exceeds 2~10%, automatic safety protectionisrealized;
12、It can automatically detect and calculate the mechanical performance index of the sample, ormanually intervene in the analysis process, and correct the automatic analysis results according to the requirements of relevant standards to improve the accuracy of the data.
1、 Maximum test force: 5kN;
2、 Accuracy class of testing machine: 0.5;
3、 Test force measurement range: 2%-100%FS;
4、 Relative error of indicating value of test force: within ±0.5% of indicating value;
5、 Test power resolution: ±1/500000 of the maximum test power (the whole resolutionisunchanged);
6、 Relative error of displacement indication value: within ±0.5% of indication value;
7、 Displacement resolution: 0.0005mm;
8、 Force control rate adjustment range: 0.1-5%FS/S;
9、 Relative error of force control rate: within ±1% of the set value;
10、Beam speed adjustment range: 0.05-500mm/min;
11、Relative error of beam speed: within ±0.5% of set value;
12、Constant force, constant deformation, constant displacement control range: 0.5%-100%FS;
13、Constant force, constant deformation and constant displacement control accuracy: whenthesetvalue is 10%FS, it is within ±1% of the set value; when the set value is ≥10%FS, it is within±0.1% of the set value;
14、Maximum stretching stroke: 950mm;
15、Effective stretching space (clear space): 750mm;
16、 Effective test width: 150*150mm;
17、Host appearance size (length × width × height): 510*450* 1750mm;
18、Power supply: 220V 50Hz 400W;
19、Weight of main engine: about 160kg.
1、 Load sensor: American high-precision sensor 5kN (One;)
2、 Test software: 64-bit test motherboard + Chinese and English test software (Oneset;)
3、 Control motor: Taiwan Delta B2 servo driver + motor (Oneset;)
4、 Reducer system: high precision reducer (One;)
5、 Drive screw: Taiwan TBI precision ball screw (One;)
6、 Test PC: HP Business PC (8 GB RAM)+ HP Inkjet Printer (Oneset;)
7、 Test fixture: according to customer sample to develop test fixture (Oneset;)
8、 Accompanying documents: machine manual, calibration data, warranty, certificate of conformity,packing list (Oneeach.)
