QE-UTM300S 300 kN Computerized Servo Universal Testing Machine
The QE-UTM300S is a floor-standing, computer-controlled electromechanical universal testing machine for tensile, compression, flexural, shear, peel, tear and component testing up to 300 kN.
Its rigid dual-column frame, AC servo drive, precision ball-screw transmission and full digital closed-loop controller provide accurate force, displacement and speed control. Professional testing software displays live curves, calculates selected mechanical properties, manages specimen batches and generates configurable reports.
Canadian Support
Technical assistance with equipment selection
Warranty Included
Manufacturer warranties on all equipment
Installation & Training
On-site or installation and hands-on training
Technical Specifications
| Characteristic | Specification |
|---|---|
| Maximum test force | 300 kN—approximately 67,443 lbf |
| Frame configuration | Floor-standing dual-column |
| Specified accuracy grade | Class 0.5 |
| Force measurement range | 2–100% FS |
| Force indication accuracy | Within ±0.5% |
| Force resolution | 1/500,000 FS |
| Displacement resolution | 0.0005 mm |
| Test speed | 0.005–200 mm/min |
| Return speed | Up to 300 mm/min |
| Maximum stroke | Approximately 1,100 mm |
| Effective tensile space | Approximately 680 mm |
| Effective test width | Approximately 450 × 450 mm |
| Control system | Full digital closed-loop servo control |
| Approximate dimensions | 1,080 × 620 × 2,250 mm |
| Approximate weight | 1,100 kg |
| Control/workstation power | 110 V, 60 Hz |
| Main-drive power | Approximately 4.5 kW |
| Warranty | 12 months |
The Class 0.5 rating and usable force range must be confirmed through calibration of the ordered load cell and complete force train.
Software Functions
- Real-time force-displacement and stress-strain curves
- Force, displacement and speed closed-loop control
- Programmable loading, holding and unloading stages
- Automatic peak-force detection
- Mechanical-property calculations
- Formula editor
- Specimen and batch database
- Statistical comparison
- Result re-analysis
- Spreadsheet-compatible export
- Configurable reports
- Automatic stop and crosshead return
Applicable Standards
The QE-UTM300S can be configured for:
- ASTM E8/E8M-25
- ISO 6892-1:2019
- ASTM A370
- ASTM E4-24
- ISO 7500-1:2018
- ASTM D638 and ISO 527-1
- ASTM D695
- ASTM D790 and ISO 178
- ASTM D412 and ISO 37
- ASTM D624
ASTM E8/E8M-25 covers room-temperature tensile testing of metallic materials, while ASTM E4-24 addresses force calibration and verification of testing machines. ASTM E8/E8M-25, ASTM E4-24
ISO 6892-1:2019 defines metallic-material tensile testing at room temperature, and ISO 7500-1:2018 addresses calibration and verification of static uniaxial testing machines. ISO 6892-1:2019, ISO 7500-1:2018
Compliance requires the correct specimen, load cell, grips, extensometer, fixtures, software method and verified calibration range.
Applications
- Tensile strength and maximum force
- Yield strength and proof stress
- Elongation and reduction of area
- Elastic or tensile modulus
- Compression strength and deformation
- Flexural strength and modulus
- Shear and tear strength
- Break force and proof-load testing
- Wire, cable and fastener testing
- Insertion, extraction and pull-off force
- Crush and component testing
- Multi-step and constant-load procedures
Yield, elongation and modulus measurements require suitable specimen measurement and extensometry.
What's Included
✓ QE-UTM300S dual-column testing frame
✓ 300 kN force-measurement system
✓ AC servo motor and digital drive
✓ Full closed-loop controller
✓ Precision gearbox and ball-screw transmission
✓ Computer workstation and monitor
✓ Material-testing and analysis software
✓ One standard fixture set selected at ordering
✓ Emergency-stop and travel-limit systems
✓ Overload and overtravel protection
✓ Communication and confirmed power cables
✓ Operating and software manuals
✓ Factory inspection documentation
✓ QMN certificate of conformity
✓ 12-month warranty
The exact grips, extensometer, fixtures, guard and calibration package will be identified in the final quotation.
Downloads
Brochure
QE-UTM300S 300 kN Computerized Servo Universal Testing Machine
Need help selecting the right configuration?
Our application specialists are here to help you choosing the best solution for your materials and workflow.
Talk to an expert
Get expert advice on models, accessories and standards.
- 647-948-7714
- info@qmnequipment.com
- Mon-Friday: 9:00am to 6:00pm ET
Frequently Asked Questions
Is this a hydraulic testing machine?
No. It is an electromechanical system using an AC servo motor, gearbox and precision ball screws.
Can it perform tension and compression testing?
Yes. It supports tensile, compression, flexural, shear and component testing with the appropriate fixtures.
Can it test plastics and rubber?
Yes. Lower-force materials normally require a lower-capacity load cell and material-specific grips.
Are grips included?
One standard fixture set selected for the customer’s primary application is included. Additional grips are optional.
Does it include a computer and software?
Yes. A workstation, monitor and professional materials-testing software are included.
Why Buy From QMN Equipment?
Equipment selected by testing professionals. Backed by CMH MetLabs expertise in:
Hardness Testing
Brinell, Rockwell and Vickers and more
Tensile Testing
Universal Testing Machines
Metallography
Sample Preparation and Analysis
NDT Inspection
UT, PT, MT, RT Solutions
Failure Analysis
Expert Analysis and Reporting
Backed by CMH Metlabs
Accredited by
Our in-house laboratory ensures you get the right equipment.
