QE-PUTM Series Man-Made Panel Universal Testing Machine
The QE-PUTM Series is a computerized universal testing platform for evaluating the mechanical properties of wood-based panels and engineered boards, including MDF, particleboard, OSB, plywood and suitable laminated panels.
With application-specific fixtures, the system supports bending, internal bond, surface bond, screw withdrawal, tensile, compression and selected shear tests.
Key Product Information
| QMN series | QE-PUTM |
| Capacity options | 10, 20, 50 or 100 kN |
| Loading system | Electromechanical servo |
| Operation | Computer-controlled |
| Force accuracy option | Class 0.5 / ±0.5%, depending on configuration and verification |
| Frame configuration | Single- or dual-column |
| Main applications | Panel strength, stiffness, bond and fastener-holding tests |
| QMN power requirement | 110 V, 60 Hz* |
Canadian Support
Technical assistance with equipment selection
Warranty Included
Manufacturer warranties on all equipment
Installation & Training
On-site or installation and hands-on training
Technical Specifications
| Model series | QE-PUTM |
| Maximum force options | 10 / 20 / 50 / 100 kN |
| Drive system | Electromechanical servo |
| Load accuracy | Class 0.5 / ±0.5% option, configuration-dependent |
| Verified force range | Defined by selected load cell and calibration |
| Speed adjustment | Stepless |
| Numerical speed range | Confirm with selected model |
| Speed accuracy | ±0.5% of setting where specified for the selected model |
| Displacement measurement | Digital; resolution to be confirmed |
| Frame type | Single- or dual-column |
| Test width, height and travel | Application-dependent |
| Display | PC-based software |
| Curve options | Force–displacement, force–time and displacement–time |
| Stress–strain display | Requires appropriate specimen inputs and measurement |
| Result options | Peak force, strength, deformation and method-specific modulus |
| Safety features | Overload protection, travel limits, emergency stop and failure-stop functions |
| Power supply | 110 V, 60 Hz, subject to factory configuration approval |
| Warranty | Manufacturer warranty; terms per quotation |
Final dimensions, measurement ranges, software functions and fixture ratings must be confirmed in the quotation.
Test Capabilities and Fixtures
| Test | Property Evaluated | Required Setup |
| Static bending | Bending strength and stiffness—MOR and MOE | Supports, loading nose or noses, and suitable deflection measurement |
| Internal bond | Tensile strength perpendicular to the panel | Bonded loading blocks and aligned tension fixture |
| Surface bond / soundness | Surface cohesion or surface-layer strength | Method-specific preparation and pull fixtures |
| Screw withdrawal | Resistance to axial screw extraction | Screw gripper and specimen support |
| In-plane tension | Tensile response parallel to the panel surface | Suitable grips and specimen geometry |
| Compression | Compressive response in the specified direction | Aligned platens and support where required |
| Shear | Strength in the specified shear mode | Dedicated method-specific fixture |
For MOE, use the deflection measurement required by the standard. Crosshead travel can include machine and fixture deformation.
Internal-bond and surface-bond tests evaluate different properties and are not interchangeable.
Applicable Standards
| Standard | Relevant Application |
| ASTM D1037 | Mechanical tests for wood-base fibre and particle panels |
| ASTM D3043 | Structural-panel flexure |
| ASTM D5651 | Surface bond strength |
| EN 310 | Bending strength and apparent bending modulus |
| EN 319 | Internal bond of particleboards and fibreboards |
| EN 320 | Axial screw withdrawal |
| EN 311 | Surface soundness |
| ASTM E4 / ISO 7500-1 | Force-system calibration and verification |
Compatibility requires suitable fixtures, specimen preparation, conditioning, loading rates and verified measurement systems. The selected ASTM D3043 method and specimen dimensions must fit the ordered frame.
ASTM D1037 includes tests requiring equipment beyond a UTM; this machine does not perform the entire standard by itself.
Applications
- MDF and HDF
- Particleboard
- OSB
- Plywood and veneer-based panels
- Overlaid and laminated wood-based panels
- Furniture and cabinetry materials
- Flooring-panel development
- Adhesive and manufacturing-process comparisons
- Incoming inspection and production quality control
- Research and independent testing laboratories
Material suitability depends on the selected method, specimen dimensions and machine configuration.
Software Functions
- Test setup and specimen-dimension entry
- Live curve display
- Peak-force calculation
- Selected strength and stiffness calculations
- Test-data storage
- Report generation
- Force and travel limits
Software language, operating-system support, export formats, batch functions and installed test methods are confirmed with the ordered package.
What's Included
✓ QE-PUTM testing frame in the selected capacity
✓ Selected load cell and measurement electronics
✓ Electromechanical servo drive and controller
✓ Computer workstation and testing software
✓ Adjustable bending fixture
✓ Compression platen set
✓ Panel tensile grips
✓ Internal-bond fixture
✓ Screw-withdrawal fixture
✓ Required connection cables
✓ Operating documentation
Why Choose This Model?
Multiple Panel Tests
Configure one testing platform for several mechanical properties by changing the fixtures and test method.
Application-Matched Capacity
Select the frame and load cell according to expected peak force and the lowest force requiring accurate measurement. Higher capacity does not automatically improve low-force performance.
Computerized Testing and Reporting
Control the test, display curves, calculate selected properties and prepare reports using the supplied software configuration.
Flexible Test Space
Select clear height, width, travel and fixture dimensions around the required specimens. Extended bending spans or full-size panels may require a special frame.
Need help selecting the right configuration?
Our application specialists are here to help you choosing the best solution for your materials and workflow.
Talk to an expert
Get expert advice on models, accessories and standards.
- 647-948-7714
- info@qmnequipment.com
- Mon-Friday: 9:00am to 6:00pm ET
Frequently Asked Questions
Which capacity should I choose?
Provide the panel type, thickness, specimen dimensions, required standards and expected forces. Both maximum capacity and verified low-force performance should cover the intended tests.
Can it calculate MOR and MOE?
Yes, with the appropriate bending arrangement, specimen measurements, deflection system and software method.
Can it test internal bond and surface bond?
Yes, when both configurations are supplied. They require different preparation and fixture arrangements.
Can it test full-size sheets?
Only when the ordered frame and loading arrangement accommodate the required method. A standard laboratory frame should not be assumed to accept full-size panels.
Does it measure moisture, thickness swelling or formaldehyde emissions?
No. These require separate equipment and procedures. Specimen conditioning may also be needed before mechanical testing.
Why Buy From QMN Equipment?
Equipment selected by testing professionals. Backed by CMH MetLabs expertise in:
Hardness Testing
Brinell, Rockwell and Vickers and more
Tensile Testing
Universal Testing Machines
Metallography
Sample Preparation and Analysis
NDT Inspection
UT, PT, MT, RT Solutions
Failure Analysis
Expert Analysis and Reporting
Backed by CMH Metlabs
Accredited by
Our in-house laboratory ensures you get the right equipment.
